B&W Classe
Rotel

B&W Reset Procedures


A5 Ensure the A5 is switched on, then press and hold the Factory Reset button located at the rear of the device. The indicator device will temporarily flash red indicating a reset has been successfully performed.
A7 Ensure the A7 is switched on, then press and hold the Factory Reset button located at the rear of the device. The indicator device will temporarily flash red indicating a reset has been successfully performed.
DB1 With the DB1 in Standby mode (Standby indicator is Red), press and hold the button until the indicator flashes (after approximately 2 seconds). Release the button. Now press and hold the button, again until the indicator flashes. Release the button. The indicator will switch to white while the DB1 settings return to their defaults and switch to red (normal Standby mode) again when the process is complete.
MM1 Unplug the AC power cord, wait 5 seconds and then reconnect.
Panorama Unplug the AC power cord. Press and hold the "ON/INPUT" and "MODE" front panel keys. Reconnect the AC power cord while holding these keys. The display will show "RESET" for 5 seconds to confirm the unit has been reset.
PV1D With the PV1D in Standby mode (Standby indicator is red), press and hold the logo on/standby button until the indicator flashes (after approximately 5 seconds). Release the button. Press and hold the > button, again until the indicator flashes. Release the button. The indicator will switch to white while the PV1D settings return to their defaults and switch to red (normal Standby mode) again when the process is complete.
Zeppelin Unplug the AC power cord, wait 5 seconds and then reconnect.
Zeppelin Air Ensure the Zeppelin Air is switched on, then press and hold the Factory Reset button located at the rear of the device. The indicator device will temporarily flash red indicating a reset has been successfully performed.
Zeppelin Mini Unplug the AC power cord, wait 5 seconds and then reconnect.
Zeppelin Wireless Ensure the Zeppelin Wireless is switched on, then press and hold the Factory Reset button located at the rear of the device for 6 seconds. The indicator device will temporarily flash white indicating a reset has been successfully performed.